Valcom V-2928 User Manual

Issue 5
1 947150
TALKBACK INTERCOM SYSTEM
V-2928 OPTION BOARD
The V-2928 Option Board is an add-on feature for the V-2924A Expandable Zone Talkback Intercom
System. The addition of this board provides the following supplemental features:
 Time sync output
 Custom page groups
 Enhanced Caller ID
 Flexible Architectural numbering plan
 Interface to the PC Programming Tool
 Store user data to EEROM

Real time clock for SMDR printer
 Auto detect for Com Port or Modem
 Evacuation tone to specified groups
 Time tones to any of the Pre-Determined
Groups selected
 Read software/firmware revision numbers
Dimensions/Weight
 5.3" L x 3.00" W x 1.10" D
 (13.46cm L x 7.62cm W x 2.79cm D)
 0.9 lbs (0.41 kg)
The V-2924A Programming Tool is a windows based
software tool designed to interface with the V-2928
Option Board. The Option Board and the Programming Tool must both be installed to access the
additional features provided by the Option Board. All features must be set with the Programming Tool
when the Option Board and Programming Tool are installed.
CONTENTS
INSTALLATION OF THE OPTION BOARD 2
INSTALLATION OF THE PROGRAMMING TOOL 2
Figure 1 - Option Board Location on the Control Board 3
USING THE PROGRAMMING TOOL 4
System Configuration 4,5
Architectural Number and CLID Programming 6,7
Audio Connection 7,8
Class of Service 8
Clock 9
Custom Page Groups 10
Master Clock Schedule 11,12
System 13,14
Save Programmed Data to File 14
COMMUNICATING WITH THE V-2924A 15
Initiating Communications 15
 Direct Connect, Modem Connect 15
Select Dialing Method
 Modem Connect, Manual Connect 15,16
Send Data to V-2924A/Receive Data from V-2924A 16,17
Set System Date and Time 17
Read Software and Firmware Revision Number 17
Ending Communications 17
SETUP OF THE V-2924A MODEM 18-21
MENU OPTIONS 21-23
Print, Window, Help, Exit
TECHNICAL ASSISTANCE, WARRANTY 23
ADDITIONAL HARDWARE CONNECTIONS 24

Valcom V-2928 Specifications

General

Brand	Valcom
Model	V-2928
Category	Intercom System
Language	English