VSP-V-2952
Issue 4
1 947952
V-2952
FM TUNER
INTRODUCTION
The V-2952 FM Tuner may be used to provide a
music source for both background music for a paging
system and music-on-hold for a telephone system.
These instructions contain the specifications and
information necessary to install, operate, and maintain
the FM Tuner.
SPECIFICATIONS
Applications
• Valcom Paging Systems
• Stand Alone Background Music Systems
• Music-On-Hold
Features
• Two individual outputs each with volume control
a) Output 1: .5 watt
b) Output 2: Line level
• Separate bass and treble tone controls
• Frequency locked loop tuning system
• External antenna provided
• Internal speaker for monitoring
• On/Off switch
• Power on indicator
• Powered by –24 Vdc or –12 Vdc
• Power jack for use with receptacle mount power
supply
• Wall or shelf mount
• Local/Distant Signal reception switch
Options
• –12 Vdc power supply available (VP-412A)
Capacity
• V-2952 will drive one 8 Ohm or six 45 Ohm
speakers from the .5 watt output.
• V-2952 will drive up to 150 Valcom one-way
amplified speakers from the line output.
Dimensions/Weight
• 6.19" H x 8.25" W x 1.55" D
(15.72cm H x 20.96cm W x 3.94cm D)
• 1.3 lbs (.59kg)
Environment
• Temperature: 10 to 40 Degrees C
• Humidity: 0 to 85% non-precipitating
Performance (Nominal)
• Frequency tuning range: 87.5 MHz to 108.5 MHz
• Power Output: .5 watt (at 8 ohms)
-10 dB (line out)
• S/N Ratio: -50dB
• Distortion: less than 2% @ rated output
Power Requirements
• Voltage: Power Input 1: –24 Vdc
Power Input 2: –12 Vdc
• Current: 250 mA
To Next Page
Need help?
General