4005086-02
1440 Four-sided Trim Kit
Use with Valor 1400 Models only
The 1440 trim is intended to be used on Valor heaters
models 1400. Mounting of the 1440 does not affect
clearances or other specifi cations listed in the heater
installation manuals—see installation manual supplied
with the heater for more information.
Overview
1400 engine
© Copyright Miles Industries Ltd., 2016
47-5/8” (1209 mm)
38-7/8” (987 mm)
1-1/2“ (38 mm) between bottom
of appliance and bottom of trim
Installation Instructions
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
H6 SERIES
Steel front panel
RH door
LH door
Plinth
Linerbox bracket
Barrier screen
Note: Mounting of this trim allows for non-combustible
material up to 3/4” (19 mm) thick installed over top of
the required 1/2” (13 mm) cement board. For thicker
fi nishes, refer to appliance manual.
To Next Page
Need help?
General
