Installation, Operating & Maintenance Instructions
Series 612 DN 250 (I.D. 10”), EtherCAT
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
Butterfly Pressure Control Valve
with EtherCAT interface and
isolation valve control
This manual is valid for the valve ordering number(s):
95248-PAGI-0002
configured with firmware 612C.1E.11
The fabrication number is indicated on each product as per the label
below (or similar):
952 . . – . . . . – . . . . / . . . .
Explanation of symbols:
Read declaration carefully before you start any other
action!
Keep body parts and objects away from the valve
opening!
Hot surfaces; do not touch!
Loaded springs and/or air cushions are potential
hazards!
Disconnect electrical power and compressed air lines.
Do not touch parts under voltage!
Read these «Installation, Operating & Maintenance Instructions» and the enclosed «General
Safety Instructions» carefully before you start any other action!
To Next Page
Need help?
General
