EasyManuals Logo
Home>Vax>Air Cleaner>AC02AMV1

Vax AC02AMV1 User Manual

Vax AC02AMV1
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Handle the plug or air purier with wet hands.
Unplug the air purier by pulling on the power cord.
Use the air purier in an area with toxic/explosive vapours/liquids, oxygen water tanks or near to ammable,
combustible materials (lighter uid, petrol, kerosene, chlorine, bleach and ammonia drain cleaner etc).
Use the air purier with incorrect voltage as this may result in damage or injury to the user. The correct
voltage is listed on the ratings label.
Use without all lters in place.
Do
Inspect the air purier regularly and remove any dust/dirt build up as this may aect the airow.
Keep all openings/grills clear and free from obstruction and sources of heat, and open ames (including
candles). Don’t attempt to remove blockages with sharp objects as this may cause damage to the air purier.
Turn o all controls on the air purier before disconnecting or connecting the power cord.
Always replace the fuse in the plug with a 3amp fuse. Always protect the power cable from heat.
Use only CE approved 13amp extension cords, non-approved extension cords may overheat.
Take care to arrange the extension cord as it can be a trip hazard.
Always switch o and unplug the air purier before performing maintenance or troubleshooting checks.
Please keep instructions for further use.
3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vax AC02AMV1 and is the answer not in the manual?

Vax AC02AMV1 Specifications

General IconGeneral
BrandVax
ModelAC02AMV1
CategoryAir Cleaner
LanguageEnglish

Related product manuals