Vax Service line: AU: 1300 361 505
NZ: 0800 800 900
9
Operation
Remove handle from main body by
pushing metal locking pin and pulling
away handle.
When using handheld steam mop
attach the accessory connector
1 and then attach the desired
accessory 2.
Remove steam mop oor head from
main body by pushing white plastic
locking pin and pulling away.
To produced steam push the
button on top of the main body
in short bursts.
Plug in unit, press on button. The
BLUE LED will illuminate when the
unit is switched on at the plug, the
power button is pressed and the
water is heating.
The GREEN LED will illuminate
within 1 minute indicating that the
steam mop is ready to use.
Using the handheld steam mop
WARNING: To reduce the risk of personal injury, unplug the steam mop when assembling the accessories.
WARNING: Always ensure there is water in the clean water tank.
To Next Page
Loading...
Need help?
General
