VERITAS NetBackup 5230 Hardware Service Procedure

Storage Disk Drive Replacement: NetBackup 5230/5240 Appliance
Document Number: 108
Version: 4.0 (7/04/16)
Purpose
This document describes the process for replacing the storage disk drives in a NetBackup 5230
Appliance and a NetBackup 5240 Appliance.
Affected Models
NetBackup 5230 Appliance
The NetBackup 5230 Appliance is a 2U system with 4 TB or 14 TB of internal storage. It consists of
either a stand-alone base server or a base server with one to four attached 3U Veritas Storage
Shelves. From the front panel of the NetBackup 5230, you can view 12 disk slots, arranged horizontally.
Two 1-TB SAS disks are installed in slots 0 and 1. Slots 2 and 3 hold blank carriers. The remaining
slots hold eight storage disks with a capacity of 1 TB or 3 TB each. All eight storage disks must have
the same capacity. Using 3-TB disks in slots 0 or 1 is not permitted. A small control panel is on the
right side of the front panel. It contains system LEDs and operations buttons, including the power
button.
Figure 1
Front view of the NetBackup 5230 Appliances
Figure 2
Rear view of the NetBackup 5230 Appliances
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
1
Veritas Appliance
Hardware Service Procedure

VERITAS NetBackup 5230 Specifications

General

Language version	-
License type	Corporate
License quantity	- license(s)
License term in years	1 year(s)