Device Information
Verizon Orbic Speed Hotspot – Initial device setup
The Orbic Speed package includes:
• Orbic Speed RC400L
• Pre-installed 3000mAh Standard Lithium Ion Battery
• Pre-installed 4G LTE SIM Card
• Wall Charger and USB Cable
Step 1. Turning your hotspot on/off
• To turn MiFi on, press and hold
the Power button for 2 seconds
• To turn MiFi off, press and hold
the Power button for 3 seconds
Power button
Step 2. Your Wi-Fi name and password
• Press the menu button twice to
navigate to the WiFi screen
• Once you navigate to the WiFi screen, you
see the 2. 4GHz WiFi INFO screen
• From the 2. 4GHz WiFi INFO screen,
press the power button to navigate to the
WiFi information screen
**Wi-Fi Name / SSID: The name that identifies the wireless network
**Wi-Fi Password: The password that’s needed to connect to the Wi-Fi network
Troubleshooting – if your MiFi does not turn on, check to ensure it is charged by using the wall charger and the cable provided.
Menu button
To Next Page
Need help?
General
