Vertiv Liebert iCOM User Manual

NOTE: Depending on the type of thermal management unit, included components, and control settings of your system,
all of the options listed may not be available on your Vertiv™ Liebert® iCOM™ display.
Dehumidification Settings Options
Capacity Increase on Dehum
Capacity increase permitted during dehumidification.
Dehum Fan Ctrl
Enables/disables fan-speed operation during dehumidification.
Dehum System Enabled
Enables/disables whether or not the compressor/valve is used for dehumidification when humidity is above the
setpoint.
Dehum Timer
Length of time, in minutes, the dehumidifier may operate.
Dehum Unit Enabled
Enables/disables dehumidification for the cooling unit.
3.3.10 Setting Water Leak Detector Options
1. Touch , then > Options Setup > Water Leak Detector. The WATER LEAKAGE DETECTOR panel
displays.
2. Make adjustments as needed and click Save. The option settings are updated.
• Touch Cancel to discard the changes without saving.
NOTE: Depending on the type of thermal management unit, included components, and control settings of your system,
all of the options listed may not be available on your Vertiv™ Liebert® iCOM™ display.
Water Leak Detector Settings Options
Water Detector
Type of water leak detector installed.
3.3.11 Setting Q15 Options
1. Touch , then > Options Setup > Q15 Settings. The Q15 SETTINGS panel displays.
2. Make adjustments as needed and click Save. The option settings are updated.
• Touch Cancel to discard the changes without saving.
3 Service Operation
67
Vertiv™ Liebert® iCOM™Installer/User Guide

Vertiv Liebert iCOM Specifications

General

Brand	Vertiv
Model	Liebert iCOM
Category	Control Unit
Language	English