PERSONAL SAFETY
PRECAUTIONS
1. Please use the spa when others are present.
2. Children should have spa access only with the
permission and supervision of an adult.
3. To reduce the risk of child drowning, keep the
spa filter clean and unclogged. Do not modify
the suction or filtration systems.
4. Exercise caution when entering or leaving the
spa. When moving or changing positions, be
sure of your footing before applying your full
weight as water refraction can be misleading.
5. Do not stay in the spa for extended periods of
time. Set a reasonable time limit after which you
leave the spa, cool down, take a shower, relax
and then return for another stay in the spa.
INSTALLATION AND SET-UP
INSTRUCTIONS SURFACE AND
PAD REQUIREMENTS
• Your new portable spa must be placed on a
uniformly firm, flat and level surface. A concrete
pad 100mm thick is best.
• In order to prevent flooding of the electrical
equipment, the pad must be such that water will
drain away from the spa.
• If your spa is located near sprinklers, adjust or
cap them so as not to hit the siding of the spa.
NOTE: Do not put your spa on any soft surface such as
sand, grass, crushed rock or dirt. Any settling
surface will put an uneven pressure and tension to
the spa structure and may void the warranty.
BALCONIES AND DECK
REQUIREMENTS
• Decking must be constructed to support
415kg m
2
.
• Balconies must be constructed to meet current
state and local codes.
• Gates must be self-closing and self-latching.
ELECTRICAL REQUIREMENTS
NOTE: Name badge on rub rail indicates equipment
location
15 amp RCD Rating
Viking 1P 120v, Viking 2P 120v, Aurora 1P 120v,
Aurora PSL 120v, Royale P 120v, Royale PSL 120v,
Regal P 120v, Regal PSL 120v
50 amp RCD Rating
Viking 3, Aurora 3, Royale, Regal, Royale ETS, Regal
ETS, Legacy 1 & Legend 1
60 amp RCD Rating
Legacy 2, Legend 2, Heritage 1 & 2, Tradition 1 & 2,
• Your 110-volt or 220-volt spa pack is designed to
be “PERMANENTLY CONNECTED”.
• It is the customer’s responsibility to acquire
necessary permits and to arrange for
installation and hook up of the electrical
power.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
03