Do you have a question about the Viking spas Viking 1P and is the answer not in the manual?
Dimensions | 78" x 66" x 31" |
---|---|
Insulation | Full Foam |
Water Capacity | 180 gallons |
Number of Jets | 16 |
Shell Material | Acrylic |
Safety guidelines for using the spa and precautions for personal well-being and safety.
Guidelines for selecting and preparing a suitable, firm, flat, and level surface for spa installation.
Structural requirements for installing a spa on balconies or decks, including load capacity and safety features.
Details on RCD ratings and requirements for connecting the spa's electrical power supply safely.
Information about the VS100 and VS500 systems and the spa models they are installed in.
Details on the initial startup procedure, including priming mode and reaching standard heating mode.
Information on the spa's temperature settings, display, and recommended temperature ranges for safe use.
Explanation of how to use the 'Temp' button to display and adjust the set spa temperature.
Details on operating the Jets, Light, and Mode functions on the spa's topside control panel.
Explanation of Standard, Economy, and Sleep modes for spa operation and their functions.
Information on configuring and understanding the spa's automatic filter cycle programming.
Instructions on how to adjust the waterfall feature on Aurora models by operating a control valve.
Details on the LED lighting system, including color sequencing and operation for various spa models.
Details on the VS502 system and its control panel for specific spa models.
Instructions for operating the VS502 topside control panel, including start-up and temperature settings.
Operation of Pump 1, Pump 2, and the spa light, including automatic shut-off and LED color cycling.
Explanation of spa modes (Standard, Economy, Sleep) and how to program preset filter cycles.
Note on freeze protection and where to find information on diagnostic messages.
Instructions for operating various spa jets (directional, rotational, poly, roto) and their types.
Details on the AirX jet option and how it is controlled using matching air controls.
Details on operating specialized jets like Turbo, Whirlpool, and Volcano, including their valve mechanisms.
Explanation of how to adjust air controls to regulate air mixed with water for hydrotherapy jets.
Information regarding stereo and Vibrosonic jet system operation, typically found in the warranty package.
Step-by-step instructions for filling the spa with water, including precautions and checks.
Instructions for managing the skimmer side filter, including initial startup and air lock troubleshooting.
Guidance on adding start-up chemicals and setting up a chemical maintenance program for the spa.
Procedure for draining the spa and identifying drain faucet locations on different models.
Recommendations for cleaning spa surfaces using recommended cleaners and avoiding abrasive materials.
Instructions for preparing the spa for long-term storage, including draining and preventing freeze damage.
Guidelines for washing and maintaining spa pillows, including precautions against off-gas damage.
Detailed instructions for cleaning spa filters for various Viking spa models.
Reference to manufacturer's instructions for spa cover care and proper installation of tiedown hardware.
Simple instructions for cleaning the spa cabinet using a mild soap solution and a rag.