II
Introduction
This guide groups ten basic rules for creating a home automation system with the By-me home automation
system: from choosing the cables for wiring the devices to correctly sizing the system and making provision
for a sufficient number of power supply units (taking account of the absorption of each device in the field); from
precisely drawing up the Areas and Lines in which the system is divided to the constraints of the speaker system;
from the maintenance of the back-up batteries for the burglar alarm system to the choice of the system topology;
from SPD installation at the power supply units to the detailed diagram for the connections between the actuators
and their loads.
These are important instructions for building and correctly operating the entire system.
COMFORT SAFETY
ENERGY
EFFICIENCY
CONTROL
global supervision
remote control
local control
automation systems
sound system
energy management
climate control
burglar alarm
technical alarms
access control
video door entry
video surveillance
lighting
control
To Next Page
Loading...
Need help?
General
