Vision CS-1600P Manual

Master/Slave
Like Vision’s other powered loudspeakers these are packaged and sold as a pair. The amplifier is
housed in the “master” loudspeaker which has the connection panel, and there is a speaker output
which connects to the passive “slave” loudspeaker.
Digital
The CS-1600P uses a class-D digital amplifier chip which uses no power at rest unlike analogue
amplifiers, and consumes very little power when in use. They are assembled on
semi-automated production lines to ensure consistency and reliability.
Audio Output
If you require two pairs for the room an audio output allows you to pass the audio signal on to a
second pair of CS-1600P. In fact you can daisy-chain as many pairs as you need using this
line-level audio output.

Vision CS-1600P Specifications

General

Brand	Vision
Model	CS-1600P
Category	Speakers
Language	English