Vision TC2-AMP3 User Manual

2
TC2-AMP3_manual_en.doc
TECHCONNECT AMPLIFIER OWNERS MANUAL
Thanks for choosing the Vision TC2-AMP3 digital amplifier! In order to obtain the best
performance please be sure to read this owner’s manual and use your product only in
accordance with the instructions.
CONFORMITY
The product described in this owner manual is in compliance with RoHS (EU directive
2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. Certificates including SGS reports
are available on request. This product should be returned to the place of purchase at the end of
its useful life for recycling.
WARNINGS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle, is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan
Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park,
Clifton Moor, York, YO30 4GH.

Vision TC2-AMP3 Specifications

Power

power output	2 x 20 watts RMS @ 8 Ω
power consumption	≤40w
power supply	100-240vAC 50/60Hz Max 1.2A, DC Output 12V 4A

Audio

total harmonic distortion	≤1% (20Hz-22kHz)
frequency response (line in)	20Hz~22kHz(±2dB)
signal to noise ratio (line in)	≥98dB (A-weighted)

Physical Characteristics

dimensions	71 x 42 x 40mm
weight	63 grams
colour	White