1. Check that the auxiliary battery has the same
voltage as the engine system voltage.
2. Connect the red positive cable to the plus (+) ter-
minal on the discharged battery and then to the
plus terminal on the auxiliary battery.
3. Connect the black start cable to the negative (–)
terminal on the auxiliary battery and to a place a
little distance away from the discharged battery
(e.g. the starter motor's negative terminal).
4. Start the engine and let it run at fast idle for
approximately 10 minutes to charge the batteries.
Make sure there is no extra equipment connected
to the electrical system.
In Case of Emergency
47701995 06-2012 111
To Next Page
Loading...
Need help?
General
