Go! Go! Cory Carson
®
Fire Rescue Freddie™
Rotate the packaging lock counterclockwise
several times.
Pull out the packaging lock and discard.
Unlock the Packaging Locks
Battery Removal and Installation
1. Make sure the unit is turned OFF.
2. Find the battery cover located on the bottom of
the unit, use a screwdriver to loosen the screw
and then open the battery cover.
3. Remove old batteries by pulling up on one end
of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery box.
(For best performance, alkaline batteries or
fully charged Ni-MH rechargeable batteries
are recommended).
5. Replace the battery cover and tighten the screw to secure.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Donotmixoldandnewbatteries.
• Donotmixalkaline,standard(carbon-zinc)orrechargeablebatteries.
• Onlybatteriesofthesameorequivalenttypeasrecommendedaretobe
used.
• Donotshort-circuitthesupplyterminals.
• Removebatteriesduringlongperiodsofnon-use.
• Removeexhaustedbatteriesfromthetoy.
• Disposeofbatteriessafely.Donotdisposeofbatteriesinfire.
RECHARGEABLE BATTERIES
• Removerechargeablebatteriesfromthetoybeforecharging.
• Rechargeablebatteriesareonlytobechargedunderadultsupervision.
• Donotchargenon-rechargeablebatteries.
PRODUCT FEATURES
1. On/Off Switch
To turn the unit On, slide the On/Off Switch to
the On position. To turn the unit Off, slide the
On/Off Switch to the Off position.
2. Automatic Shut-Off
To preserve battery life, the Go! Go! Cory Carson
®
character will automatically
power down after approximately 30 seconds without input. The unit can be turned
on again by pressing the Light-Up Button, placing or removing the accessory on
thecharacterorbyrollingthecharacterquickly.
1
2
91-003967-000
US
WARNING: All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE: Please keep this parents’ guide as it contains important
information.
ATTENTION : Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils ne
font pas partie du jouet.
NOTE : Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.