6
5. This toy contains batteries that are non-replaceable.
6. Do not leave the toy in extremely high temperatures such as close to
fire or hot oven.
7. Keep the rubber cover of the micro-USB port closed tightly while it is
not in use in order to prevent dust or water from getting into the micro-
USB port.
Cleaning the KidiCom
®
Advance 3.0 Touch Screen
• Slightly dampen a soft, lint-free cloth with a little water and wipe the
screen to loosen dirt.
• Use a clean and dry cloth to wipe the screen dry. Repeat these two steps
as needed.
Cleaning the KidiCom
®
Advance 3.0 Cabinet
• Keep your KidiCom
®
Advance 3.0 clean by wiping it with a slightly
damp cloth. Never use solvents or abrasives.
Standard guidelines for adaptor toys and
electrically operated products
• Use only the VTech
®
adaptor (AC/DC 5V) that complies with EN61558/
EN62368
• This toy shall be used with the power supply supplied, if the power supply
is supplied with the toy.
• This toy shall only be used with a power supply for toys with output DC
5V.
• The power supply is not a toy.
• This toy is not intended for use by children under 3 years old.
• Do not connect the toy to more than the recommended number of power
supplies.
• Never clean a plugged in toy with liquid.
• Please examine the power supply periodically for conditions that may
result in the risk of fire, electric shock, or injury to persons (such as
damage to the supply cord, output cord, plug, blades, housing, or other
parts) and that, in the event of such conditions, the power supply should
be appropriately disposed of.
• Power supplies for toys are not intended to be used as toys, and the use of
these products by children shall be under the full supervision of parents.
• As with all electrical products, precautions should be used and observed
during handling and use to prevent electric shock.
• Do not leave the toy plugged in for extended periods of time.
• If the pins of the plug are damaged, the plug-in power supply should be
scrapped.
• If the USB cable is damaged, it cannot be used and must be replaced
with a recommended cable. Please visit www.vtech.co.uk or contact
our Customer Service hotline on 0330 678 0149 (from UK), or +44
330 678 0149 (outside UK) for more information and to purchase a
replacement.