VTech SN5127 User Manual

85
8. Additional devices
Add and register a new device
1


When the telephone is
not in use, press and hold
PAGE on the telephone
base for about five
seconds until the visual
ringer indicator light turns
on. Release PAGE.
Press and hold the pair button on the
right side of the remote ringer until the
green LED light on the front flashes, then
release the button. When registration is
successful, the green LED light becomes
steady on, and then the base beeps once.



Remote ringer
Press and hold CANCEL on the back of
the SOS pendant until the LED light on
the front flashes, then release the button.
When registration is successful, the LED
light turns off, and then the base beeps
once.



SOS pendant
Press and hold the pair button on the
back of the audio doorbell until the chime
button LED light flashes, then release the
button. When registration is successful, the
chime button LED light becomes steady
on, and then the base beeps once.


Audio doorbell
2
• You need to register your newly purchased devices to the telephone base before use.
• Make sure the new devices are powered on with batteries or AC power before
registering them to the telephone base.

VTech SN5127 Specifications

General

Color	white
Speakerphone	yes
Expandable	yes
Volume Control	no
Intercom	yes
Incoming Lines	1
Visual Ring Indication	yes
Dialing Mode	pulse, tone
Record Time	22 minutes
Display Type	lcd
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	no
Conference Call	yes
Conference Call Capability	yes
Mute	yes
Caller ID Memory	50 gigabytes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	1, 4
Backlit Keypad	no
Keypad Location	handset
Remote Access	yes
Frequency	dect 6.0 digital