User Guide
Set up your device
1. First, follow the directions in this section of user help. The Quick Start Guide included in
the box contains images that can help.
o Attach any stands that are included with your device.
o Set up your work area.
2. After you set up your device, follow the directions in the Get started section of this user
help so you can start using your device.
o Connect your device to your computer.
o Install the driver.
Set up your work area
Position your tablet, pen, and keyboard for easy access.
Adjust your monitor so you can view it comfortably without eyestrain, placing it about
one arm's length away from you.
Position the tablet so the screen cursor follows the same direction as your hand
movements on the tablet.
If you are using the tablet as a creative tool, consider placing the tablet below the
keyboard and centered below your monitor.
Install the driver
Important: You must install the driver for your device to work properly, unless your device
comes with a pre-installed driver. Refer to the Quick Start Guide to discover if your device has a
pre-installed driver or not.
1. Go to the Wacom drivers page.
2. Click Download next to the latest driver that corresponds to your computer's operating system.
3. Follow the prompts to finish the driver installation.
Update the driver
Updated drivers are available on the Wacom Desktop Center and at the Wacom drivers page
periodically. Check in and update regularly so that your device has the latest features and
functionality.
From the Wacom Desktop Center, select Updates, and then click the update to install it.
To Next Page
Need help?
General
