EasyManuals Logo
Home>Wavecom>Modem>WMOi3

Wavecom WMOi3 User Manual

Default Icon
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
WMOi3 integrated Modem
confidential
©
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut
être communiqué ou divulgué à des tiers sans son autorisation préalable.
10
3.2.4.2
Microphone 1
The MIC1 inputs are differential and do not include internal bias. To use these
inputs with an electret microphone, bias has to be generated outside the
WMOI3 modem according to the characteristic of this electret microphone.
These inputs are the standard ones used for an external headset or a handsfree
kit. The connection can be either differential or single-ended but using a
differential connection in order to reject common mode noise and TDMA noise
is recommended. When using a single-ended connection, be sure to have a
very good ground plane, a very good filtering as well as shielding in order to
avoid any disturbance on the audio path.
The gain of MIC1 inputs is internally adjusted. The gain can be tuned from
30dB to 51dB.
Pin description
Pin descriptionPin description
Pin description
Signal
SignalSignal
Signal Pin #
Pin #Pin #
Pin # I/O
I/OI/O
I/O I/O type
I/O typeI/O type
I/O type Description
DescriptionDescription
Description
MIC1P 20 I Analog Microphone 1 positive
input
MIC1N 22 I Analog Microphone 1 negative
input
3.2.4.3
Speaker 2
Speaker outputs SPK2 are push-pull amplifiers and can be loaded down to 50
Ohms and up to 1nF. These outputs are differential and the output power can
be adjusted by step of 2dB. The output can be directly connected to a speaker.
The connection can be differential or single-ended but using a differential
connection to reject common mode noise and TDMA noise is recommended.
When using a single-ended connection, be sure to have a very good ground
plane, a very good filtering as well as shielding in order to avoid any
disturbance on the audio path.
Pin description
Pin descriptionPin description
Pin description
Signal
SignalSignal
Signal Pin #
Pin #Pin #
Pin # I/O
I/OI/O
I/O I/O type
I/O typeI/O type
I/O type Description
DescriptionDescription
Description
SPK2P 10 O Analog Speaker 2 positive output
SPK2N 8 O Analog Speaker 2 negative output

Other manuals for Wavecom WMOi3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wavecom WMOi3 and is the answer not in the manual?

Wavecom WMOi3 Specifications

General IconGeneral
BrandWavecom
ModelWMOi3
CategoryModem
LanguageEnglish

Related product manuals