EasyManuals Logo
Home>Webasto>Control Unit>MultiControl

Webasto MultiControl Quick Start Guide

Webasto MultiControl
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
10 Statutory regulations governing installation
Regulations Type-approval numbers for MultiControl | SmartControl
Electromagnetic compa-
tibility
ECE R10
04 7319
MultiControl | SmartControl
NOTE
The provisions of these regulations are binding within the scope of EU Regulation
2018/858 and should also be observed in countries where there are no special regulati-
ons.
IMPORTANT
Failure to follow the installation instructions will result in the invalidation of the type
approval for the heater and therefore invalidation of the general homologation of the
vehicle.
NOTE
For vehicles with an EU type approval, an entry is not required in accordance with § 19
section 4 of appendix VIII b of StVZO. Country-specific registration regulations must be
complied with.
11 Installation
Detailed information can be found in the operating and installation instructions.
The documents are stored on the DVD included in delivery.
X
Install and connect wiring harness, see Section „12 Electrical Connections“.
X
Connect and install MultiControl | SmartControl.
Quick Start Guide
MultiControl | SmartControl
You will find more detailed operating instructions at www.webasto.com.
EN
In multilingual versions the German language is binding. If a language is not available, ple-
ase contact the Webasto Service Centre for this purpose (see the brochure with the service
phone numbers of the respective subsidiaries).
www.webasto.com
Ident. No. 9030005C 12/21 Errors and omissions excepted © Webasto Thermo & Comfort SE,
12 Electrical Connections
DANGER
Incorrect handling
Cables damaged on sharp edges can cause short-circuits. Fit protectors on sharp
edges.
Connector designation
4
3
2
1
1
1
Con. Description Remarks
1
W Bus / Low
Switch / Diag-
nostics
The connection is configured
differently depending on the
heater selected. Please note
that there is no W-bus on this
line for heaters with analogue
control. W-bus diagnostics are
only possible with a W-bus hea-
ter connected or with a UniBox
connected.
2
SAU1 switch
output
max. switching current 500 mA
3 KL30 Plus+
4 KL31 Earth-
13 Dimensions
68
48
10
5
15
14 Declaration of Conformity
CE-Declaration of Conformity and UKCA-Declaration of Conformity
The MultiControl | SmartControl was developed, manufactured, tested and supplied in
accordance with the relevant directives, regulations and standards for safety, EMC and
environmental compatibility.
Webasto declares that the product MultiControl | SmartControl is manufactured and
delivered in accordance with the directives and regulations. The complete CE Declaration
of Conformity and UKCA Declaration of Conformity can be found in the download area
at https://dealers.webasto.com.
MultiControl
+HDWLQJ
+HDWLQJ
SmartControl
Europe, Asia Pacific
Webasto Thermo & Comfort SE
Postfach 1410
82199 Gilching
Germany
Company address:
Friedrichshafener Str. 9
82205 Gilching
Germany
UK only:
Webasto Thermo & Comfort UK Ltd
Webasto House
White Rose Way
Doncaster Carr
South Yorkshire
DN4 5JH
United Kingdom
VBI Group - DK 6070 Chrisansfeld - Tel. +45 74 56 13 26 - www.vbi-group.eu - Facebook: @VBI.Group

Other manuals for Webasto MultiControl

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Webasto MultiControl and is the answer not in the manual?

Webasto MultiControl Specifications

General IconGeneral
BrandWebasto
ModelMultiControl
CategoryControl Unit
LanguageEnglish

Related product manuals