EasyManuals Logo
Home>Weslo>Treadmill>CADENCE LX25

Weslo CADENCE LX25 User Manual

Weslo CADENCE LX25
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
i
4. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON
a. Use only a ULdisted surge protector, rated at 15 arnp8, with a 14-gauge cord of five feet or less in length.
b. If the walking belt is o_,edlghtened, treadmill performance may
decrease and the walking belt may be perrnanenlty d_roaged.
Remove the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts counterclock-
wise, 1/4 of a turn. When the walking belt is properly tightened,
you should be able to lift each side of the walking belt 3 to 4
inches off the walking platform. The center Of the walking belt
should just touch the walking platform. Be careful to keep the
walking belt centered. Plug in the power cord, insert the key and
run the treadmilr for a few minute@. Repeat until the walking belt
is properly tightened.
¢. If the walking belt still alows when walked on, please call our toll-free Customer Service Depadment.
5. SYMPTOM: THE WALKING BELT IS OFF-CENTER WHEN WALKED ON
a. If the walking belt has shifted to the left, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn the
left rear roller adjustment bolt c]ockwise, and the dgth bolt coun-
terclockwise, 1/4 of a turn each. Be carefur not to overtlghten the
walking belt. Plug in the power cord, insert the key and run the
treagroiil for a few roinutes. Repeat until the walking bait is cen-
tered.
b. If the walking belt has shifted to the dght, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench,
turn the left rear miler adjustroect bolt counterclockwise, and the
right bolt clockwise, 1/4 of a turn each. Be careful not to over-
tighten the walking belt, Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until the walkthg
belt is centered.
¢. If the walking belt allpo when walked on, first remove the key
and UNPLUG THE POWER CORD, Using the allenwrench,
turnbeth rearrolleradjustmect beltsclocl_'_ise,I/4ofa turn,
When the walkingbeltIscorrecllytightened,you should be able
tolifteach sideofthe walkingbelt3 to4 inches of_thewaI_ng
platform.Tn_ centerofthe walkingbertshouldjusttouch the
welkingpi_orm. Be carefulto Keep thewalking beltcentered.
Plug inthe power oord,Insertthe key and ru_ the treadmillfora
few minutes.Repeat _nlttthe wa_ing belt_ pmpo_y tightened.
I@

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Weslo CADENCE LX25 and is the answer not in the manual?

Weslo CADENCE LX25 Specifications

General IconGeneral
BrandWeslo
ModelCADENCE LX25
CategoryTreadmill
LanguageEnglish

Related product manuals