OPERATION
iCapsol Mini Deluxe
WINDSOR
01)
inspeCt Brush: When the black
brush bristles reach the height
of the yellow indicator bristles
replace the brush.
05)
Press the blue button to
spray chemical. Press the
green button to move.
04)
Make sure all three prongs are
on the body of the cord and plug
into an outlet. if one of the prongs
is Missing, notify your supervisor.
02)
Check that the debris tray
is in place.
06)
in Case of eMergenCy: press
the red button to stop the
machine.
03)
Fill solution tank with
encapsulation chemcial or
fresh water.
07)
Unplug the cord from the wall
and wrap cord for storage start-
ing from the base. Wrapping the
cord properly will help prevent
cord failure.
To Next Page
Need help?
General
