Select Continue.
The program guide will
download.
When the status bar reaches
100%, press Continue.
Errors may be displayed on the
Installation Status screen. This is
normal to see one or two boxes
with an X instead of a .
Select Continue.
You will be prompted to set
up the remote. Select Setup
Remote Later to do this at a later
time.
Select Watch DIRECTV.
The receiver will run Data Feed
and Guide Feed Tests for a few
moments.
The Mission antenna will operate with most DIRECTV receivers. Winegard does
not recommend using receivers with hard drives not recommended by the
manufacturer for mobile applications. Winegard does not recommend using an
HD receiver since HD programming will not be available.
13 Mission Antenna
9
11
Mission Antenna 14
7
10
12
Receiver Recommendations
8
To Next Page
Loading...
Need help?
General
