14
Owner’s Manual EN
5.3 Cut to edge
Off-centered blade turning disc design provides a clean cut with
narrowest distance to the boundary or wall. It helps minimize the
amount and frequency of manual trimming along the boundary.
Additionally, Landroid
®
is designed with a protective cover underneath
that prevents objects from touching the turning blades and/or injury.
(See Fig. F)
5.4 How efficiently will my Landroid
®
mow the grass?
Mowing times are different for every lawn depending on the factors mentioned below. Gradually adjust the time you allow
Landroid
®
to mow each day until you find the most suitable setting.
Your Landroid
®
is capable of mowing areas of different sizes, although this depends on various factors, such as:
• Species of grass in your lawn and its growth rate
• Sharpness of the cutting blades
• Humidity
• Surrounding temperature
• Amount of obstacles in your Lawn
Unlike most other mowers, Landroid
®
uses a side charging system, which is able to cut the surrounding grass as much as
possible. The holes on the bottom of the charging base allow the grass to grow through the base to help disguise it and create
an elegant appearance.
Landroid
®
’s cutting height can be adjusted between 30mm-60mm.
Before starting your Landroid
®
for the first time, you should cut the
grass to the height no more than 90mm with your manual lawnmower.
Then, set the cutting height of your Landroid
®
to its maximum setting
60mm for its first time mowing. (See Fig. G)
Your Landroid
®
will cut best in dry weather. Wet grass can build up on
the blade turning disc and within the motor, and can also cause loose
traction and slippage while working.
Your Landroid
®
is afraid of lightening storms. In case of a lightning
storm, protect Landroid
®
by unplugging the charging base,
disconnecting the boundary wire, and making sure Landroid
®
is not
allowed to charge.
“Cut to Edge” Tech
F
Wed.03/21 12:14
E1
Only for reference
Wed.03/21 12:14
E2
Only for reference
To Next Page
Loading...
Need help?
General
