1
English
Phaser 5335
Network Expansion Card
Installation Guide
Thank you for purchasing the network expansion card.
This guide is intended for first-time users and gives instructions on installing the product.
To ensure safe operation of the printer, be sure to read "Safety Notes" in the ‘User Guide’
before starting the installation.
WARNING
• This equipment has been designed to restrict operator access to safe areas only.
Operator access to hazardous areas is restricted with covers or guards, which would
require a tool to remove. Never remove these covers or guards.
Important
• Before plugging or unplugging the interface cable connector, be sure to switch off the printer or unplug
the power cord from the power outlet. Plugging or unplugging the connector when the printer is on can
cause printer failure.
• If installing the network expansion card when the printer is used in a network environment, the entire
network-related settings will be initialized to the defaults. Before installing the network expansion card,
we suggest yourecord the current settings by printing out the [Printer Settings] list. Refer to the ‘User
Guide’ on how to print the [Printer Settings] list.
Checking the Package Contents
The packaging box contains the following items. If you find any items missing, please
contact our Customer Support Center or your dealer.
• Network expansion card • 2 screws
•This guide
Part Number: 701P47286
Ver 1.0 December 2007
To Next Page
Need help?
General