Xerox Versant 280 Press User Manual

Clearing Staple Jams in the Booklet Stapler
Note: Ensure that the press is not running before performing this procedure.
1. Open the finisher front cover.
2. Pull out the Saddle Stitch Unit 3 toward you until it stops.
3. While holding the tabs on the staple cartridge, pull out the cartridge to remove it.
4. Remove any jammed staples.
WARNING: To avoid personal injury, use care when removing jammed staples.
364

Xerox Versant 280 Press Specifications

General

Brand	Xerox
Model	Versant 280 Press
Category	All in One Printer
Language	English