EasyManuals Logo
Home>Xerox>All in One Printer>WorkCentre 7220

Xerox WorkCentre 7220 Quick Start Guide

Xerox WorkCentre 7220
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
NOTE:Toavoidjamsandmisfeeds,donotremovepaperfromitspackaginguntilyouarereadytouseit.
6.Loadthepaperinthetray.
Forlongedgefeed,insertletterheadandpreprintedpaperfacedownwiththetopedgetowardthefront.
Loadholepunchedpaperwiththeholestotheleft.
Loadlabelsfaceupwiththetopedgetowardthefrontofthetray.
Forshortedgefeed,insertletterheadandpreprintedpaperfacedownwiththetopedgetotheleft.Load
holepunchedpaperwiththeholestowardtheback.
Loadlabelsfaceupwiththetopedgetotheright.
NOTE:Donotloadpaperabovethemaximumfillline.Overfillingthetraycancausetheprintertojam.
7.Adjustthelengthandwidthguidestofitthepaper.
8.Closethetray.
9.Dooneofthefollowing:
Toconfirmthepapersize,type,andcolorwhenatrayissettoFullyAdjustable,select[Confirm].Toselect
anewpapersize,select[Size].Toselectanewpapertype,select[Type].Toselectanewpapercolor,
select[Color].Whenfinished,select[Confirm].
Tochangethepapersize,type,orcolorwhenthetrayissettoDedicatedmode:
a.LoginastheSystemAdministrator.SeetheRelatedContentforadditionalinformation.
b.Pressthe[MachineStatus]buttonontheControlPanelandthenselectthe[Tools]tabontheTouch
Screen.
c.Select[DeviceSettings]andthen[PaperManagement].
d.Select[TraySettings]andthenselectadedicatedtray.
e.Tomodifythetraysettings,select[Edit].
f.Select[Size],[Type],or[Color]tochangethepapersize,papertype,orpapercolor.
g.Select[OK].
SettingtheGuideLocksinthe500SheetAdjustableTrays
Youcanadjusttheguidesintrays14toaccommodatestandardorcustompapersizes.Inthestandardposition,
theguidesmoveintothesupportedstandardpapersettings.Inthecustomposition,theguidesmovein1mm
increments.
Tomovetheguidelocksfromthestandardtothecustompapersizeposition,dothefollowing:
1.Pulloutthetrayuntilitstops.

Other manuals for Xerox WorkCentre 7220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 7220 and is the answer not in the manual?

Xerox WorkCentre 7220 Specifications

General IconGeneral
BrandXerox
ModelWorkCentre 7220
CategoryAll in One Printer
LanguageEnglish

Related product manuals