Instructions
Charging
●
Charging the earphones
When the earphones are placed in the charging case, they will automatically start
charging.
●
Charging the charging case
Use the Type-C charging cable to charge the charging case, or place it on a compatible
wireless charger with the indicator of the charging case facing upwards. The indicator is
red while charging, and turns green when the earphones and the charging case are fully
charged.
Checking Battery Level
●
Checking the battery level of the earphones
After connecting the earphones to a phone, you can check the earphones' battery level on
the phone's status bar.
Note: The phone's status bar always displays the battery level of the earphone with the
lowest battery level. This feature is not supported by some phones.
●
Checking the battery level of the charging case
Open the charging case's lid, or press the function button if the lid is closed:
1. If the battery level of the charging case is equal to or less than 40%, the indicator will
remain red for 7 seconds and then turn off. If the battery level of the charging case is
more than 40%, the indicator will remain green for 7 seconds and then turn off.
2. If the indicator slowly blinks red, it indicates the charging case runs low on battery and
should be charged immediately.
●
Checking the battery level by a Xiaomi/Redmi
After successfully connecting to a phone, place the earphones into the charging case and
close its lid. Make sure the Bluetooth function is enabled on your Xiaomi/Redmi . Hold
your phone close to the charging case, then open the case's lid. A notification will appear
on the phone, then you can check the battery level of the earphones and the charging
case.
Note: When checking the battery level on your phone, please update your Xiaomi/Redmi
to the latest stable version. This feature is currently only supported by some
Xiaomi/Redmi.
Turning On
When opening the charging case, the earphones will automatically turn on.
Sleep Mode
Place the earphones back into the charging case and close the lid, the earphones will
disconnect and go into sleep mode automatically.
Wearing
Take the earphones out of the charging case, and insert them into your ears according to
the left (L) and right (R) marks.
Note: After using the earphones, place them back into the charging case. This will extend
their lifespan and help you avoid losing or misplacing them.
03
To Next Page
Loading...
Need help?
General
Weight and Dimensions
