Xiaomi Mi 20W Wireless Car Charger User Manual

2. Make sure there are no metal objects on the surface of the wireless car
charger, nor on the back of the compatible phone which meet the Qi standard.
Move the phone close to the inductive sensor, and the wireless car charger's
arms will open automatically then close automatically to clamp down the
phone. The indicator light will be blue while charging normally.
How to Use
Note: Please properly tighten the knob before use to prevent accidental movement during use.
Welcome Light
Indicator
1.Use the clamp to secure the Mi 20W Wireless Car Charger onto the air vent
and tighten the knob on the back. Plug in the supplied charger into the car's
cigarette lighter or power port, and insert the USB-A interface into the charger's
red USB port. Then plug in the USB-C interface into the car charger. When the
indicator blinks blue three times, and the welcome light remains lit up, the
wireless car charger is functioning normally.
Car Charger

Xiaomi Mi 20W Wireless Car Charger Specifications

Power

input voltage and current	5 V=3 A, 9 V=2 A, 12 V=2 A, 15 V=1.8 A, 20 V=1.35 A
output power	20 W Max.

Operating Environment

inductive sensing distance	≤ 4 mm
operating temperature	0 ℃ to 40 ℃

Weight and Dimensions

item dimensions	117.2 × 73.4 × 91.7 mm