” “
mea
ns for indoor use only.
Do not use the lightstrip in high temperatures or high humid
ity
environments.
Do not bend it for more than 90°.
The lightstrip should be installed in an area out of the reach of
children.
Children should not be allowed to wrap the lightstrip around
their necks to avoid entanglement or suffocation.
Do not use aromatic hydrocarbon or chlorofluorocarbon
solvents to wipe the lightstrip.
Interconnection shall be made only by the use of the supplied
connectors, any openends must be sealed-off before use.
Read this manual carefully before use, and reta
in it for future
reference.
Precautions
Do not open or cut the lightstrip.
Do not connect to power before installing the lightstrip. When
connecting to power, it is forbidden to remove or install the
extension lightstrip.
Do not use the lightstrip when covered or recessed into a
surface.
Do not connect the lightstrip to the supply while it is in the
packing or wound onto a reel.
Do not disassemble or repair the lightstrip to avoid a risk of
electric shock.
Disconnect the lightstrip from the power supply if the
controller is damaged. Otherwise, there is a risk of electric
shock.
1
To Next Page
Loading...
Need help?
General
