please do not use the motor in a closed environment. Closed environment will lead to
motor temperature, shorten service life
2-2-2. Environment conditions
When used in places with water or oil, the protective effect can be achieved through the
treatment of the motor. However, when sealing the shaft through part, please specify the
motor with an oil seal. Please install the connector downward.
MS series servo motors are for indoor use, please use in the following installation conditions:
-20%~90%RH (no condensation)
-20%~90%RH (no condensation)
2-2-3.Installation notes
◆ Please clean the "anti-rust agent" at the extension end of the shaft of
the servo motor before installation, and then do the relevant anti-rust
treatment.
Breakthrough part of the shaft
To Next Page
Need help?
General
