83
Configuring Your onyX
among the following options:
i. If the chosen storage location is empty (denoted by “---“), or
if the storage location contains the FM preset currently being
used (denoted by “current”), then the FM channel tuning
screen is displayed.
ii. If the chosen storage location has an FM preset that is not
currently being used, and you want to edit it, Edit Channel is
highlighted. Press the Select button. The FM channel tuning
screen is displayed.
iii. If the chosen storage location has an FM preset that is not
currently being used, and you want to start using it, press
to
highlight Start Using and press the Select button. Skip to step
7.
5 Press and to tune the
desired FM channel in steps of
.2, i.e., 99.3 to 99.5. Press
and
to tune the desired
channel in steps of 1, i.e., 99.3 to
100.3. Press the Select button
to select the FM channel.
6 If you are editing the storage
location that has the “current”
FM preset, skip to step 7.
Otherwise, Start Using will be highlighted. Press the Select button.
NOTE! You can also preset an FM channel in a storage location without
having to start using it right away. Just press menu and exit the screen.
Edit FM Channel 2
99.3 FM
and Select to confirm
Press arrow keys to tune
To Next Page
Loading...
Need help?
General
