43
30 1321 COMPOSITE BRACE FOR BUMPER (2)
30 1323 FRONT BODY MOUNT SET +1MM HEIGHT
30 1333 REAR BODY MOUNT SET +1MM HEIGHT
33 1200 COMPOSITE BUMPER
33 1212 COMPOSITE UPPER HOLDER FOR BUMPER
33 1222 FOAM BUMPER FOR ANTI-ROLL BAR
33 6186 GRAPHITE REAR STIFFENER
33 6400 THROTTLE SYSTEM SET
33 6401 BRAKE SYSTEM SET
35 8950 SILICONE TUBING 1M (2.4 x 5.5MM)
BAG
9. CARB LINKAGE & BODYMOUNTS
35 8951 SIL. TUBING 1M (2.4 x 5.5MM) YELLOW (OPTION)
90 1303 HEX SCREW SB M3x3 (10)
90 2306 HEX SCREW SH M3x6 (10)
90 2308 HEX SCREW SH M3x8 (10)
90 2310 HEX SCREW SH M3x10 (10)
90 3308 HEX SCREW SFH M3x8 (10)
90 3310 HEX SCREW SFH M3x10 (10)
96 0030 NUT M3 (10)
98 1212 PIN 2x12 (10)
336400
336400
336400
336400
902306
903310
902308
331222
981212
901303
902306
902310
901303
336400
902310
981212
358950
336401
Servo Screw (not included)
336400
331212
960030
301321
331200
903308
903308
903308
336401
336186
336401
336400
902308
336401
301323
301333
#331216
GRAPHITE UPPER HOLDER FOR BUMPER 2.5MM
#331221
FOAM BUMPER FOR ANTI-ROLL BAR - HARD - V2
#331201
COMPOSITE WIDE BUMPER
The wider front bumper is used without the foam bumper.
The wider front bumper improves steering, but may allow
more front damage under hard crashes.
#301351-O
ALU ADJUSTABLE BODY POST STOP (2)
Very handy, easily externally adjustable body
post from Swiss 7075 T6 aluminum. Allows for
adjustment of body height by 3mm without
needing to change the position on the body post.
FRONT BODY MOUNTS
#301322 0mm INCLUDED
#301323 +1mm OPTION
#301324 +2mm OPTION
#334061-O
ALU BRAKE POST ARM - SWISS 7075 T6 - ORANGE
To Next Page
Need help?
General
