7
1. FRONT GEAR DIFFERENTIAL & SOLID AXLE
SOLID AXLE
971240
O 24x0.7
903206
SFH M2x6
The front diff can be easily changed into a solid axle. Remove the
internal gears and replace with the solid axle locking body. DO NOT
add silicone oil inside the housing when making a solid axle.
903258
SFH M2.5x8
981210
P 2x10
972050
O 5x2
964050
S 5x15x0.3
962051
S 5x10x0.2
903258
SFH M2.5x8
Tighten the screws
equally but do NOT
tighten them completely
Finish tightening in
this order
➊
➋
➌
➍ ➎
➊
➋
➌
➍
➎
➊
➋
➌
➍
After disassembling the differential, the large O-ring
may have an increased size and may be more difficult to
re-install. We recommend either replacing the O-ring
with a new one or carefully re-inserting the old O-ring
in the diff cover.
➊
➋
➌
➍
NOTE ORIENTATION
To Next Page
Loading...
Need help?
General
