⚫ Wear the goggles accord with ANSI standard
⚫ Keep clothes, hair hand, tool, tester etc away from
running or calorific engine
⚫ Before start engine, you should confirm parking
braking is working, put barrier in front wheels, and
put gear shift lever in neutral gear or ppark, to
avoid hurting people on the spot when start
engine, vehicle speeds up suddenly
⚫ Be extremely careful when working around the
ignition coil, distributor cap, ignition circuit and
ignition plug. The voltage generated by these
components when the engine is running is very
dangerous.
⚫ Equipped with special fire extinguishers for
gasoline, chemical, electrical fires etc in the
working area.
⚫ When the ignition switch is turned on or the