Need help?Do you have a question about the XYZ Printing da Vinci 1.0 Pro and is the answer not in the manual?
General| Print Technology | Fused Filament Fabrication (FFF) |
|---|---|
| Build Volume | 200 x 200 x 200 mm |
| Layer Resolution | 100-400 microns |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Software | XYZware Pro |
| Connectivity | USB |
| Supported Filament Types | PLA, ABS |
| File Format | .stl, .3w |
| Power Requirements | 100-240V, 50-60Hz |
| Dimensions | 468 x 510 x 558 mm |
| Weight | 23.5 kg |
| Display | 2.6-inch FSTN LCM |
To Next Page
