DR-1X/XE
Installation Instructions for the DR-1X/XE
RX-UNIT (V1.00t) and DSP rmware (V4.11)
Attention !
Two versions of the update firmware are available. Before in-
stalling the new rmware, please check the rmware version of
the DR-1X/XE referring to Page 2.
r
V1.00m replaces V1.00b and any versions other than
V1.00f which is for Wide-FM operation
r
V1.00t replaces V1.00f for Selectable Wide/Narrow-FM
operation
This rmware update contains the following additional features.
If you are not interested in these features, you may skip this
rmware update.
m
Adjustable Squelch Hysteresis
m
Adjustable Squelch Tail
m
CWID/Voice announcements with stripped PL Tones
* If the DR-1X/XE Repeater has the rmware V.1.10D, all these
features and other updates have been already installed, and
you do not need to install this rmware.
YAESU MUSEN CO., LTD.
To Next Page
Need help?
General
