Need help?Do you have a question about the Yaesu FRDX-400 and is the answer not in the manual?
Detailed technical specifications for the receiver's performance and features.
Explanation of the receiver's double conversion superheterodyne design and signal path.
Description of the antenna signal path through RF amplifier and first mixer stages.
Details on the second IF stage, mechanical filters, and detector circuits for signal processing.
Step-by-step guide for setting up and operating the receiver for SSB communication.
Instructions for configuring the receiver for optimal CW (Continuous Wave) reception.
Guidelines for setting up and tuning the receiver for AM (Amplitude Modulation) broadcast reception.
Procedure for safely removing the receiver's chassis from its cabinet for internal access.
Troubleshooting steps for issues where the unit's lights are not functioning.
Diagnostic guide for when the receiver powers on but produces no sound output.
Steps to isolate issues when audio is present but not reaching the output stage.
Procedures for installing and aligning optional mechanical filters for different reception modes.
Steps for aligning the FIX Oscillator Unit to ensure proper crystal-controlled operation.
Procedures for installing and aligning the FM Unit for proper reception.
Instructions for aligning VHF converter units to specific frequency bands and crystals.
To Next Page
General
