EMX2000
IMPORTANT NOTICE
This manual has been provided
for
the use of
authorized
Yamaha Retailers
and their service
personnel.
It has been
assumed
that basic service procedures
inherent
to the industry, and more specifically
Yamaha Products, are already
known and under-
stood
by
the users, and have
therefore not been restated.
WARNING:
Failure
to
follow
appropriate
service
and safety procedures
when servicing this product may result in per-
sonal injury,
destruction of
expensive
components
and failure of the product
to
perform
as specified. For
these reasons,
we
advise all Yamaha product
owners
that all
service required
should
be
performed by an
authorized Yamaha Retailer or the
appointed service
representative.
IMPORTANT:
This presentation
or sale of this manual
to any individual
or
firm does
not
constitute
authorization, certifi-
cation, recognition
of any
applicable
technical
capabilities, or
establish
a principal-agent relationship
of
any form.
The data provided
is belived to be accurate and applicable
to the
unitls)
indicated on
the coyer.
The
research engineering, and
service departments
of Yamaha are continualiy
striving to improve
Yamaha
products.
Modifications
are,
therefore, inevitable
and changes
in specification
are subject to change without
notice or obligation to
retrofit. Should
any
discrepancy appear
to
exist, please
contact
the distributor's Service Division.
WARNING:
Static discharges can destroy
expensive
components. Discharge
any static electricity
you
body may have
accumulated
by
grounding yourself
to the ground buss in the
unit (heavy gauge black
wires connect
to
this buss.)
IMPORTANT:
Turn the unit OFF during disassembly and parts
replacement. Recheck all work before
you apply power
to the unit.
WARNING:
CHEMICAL
CONTENT
NOTICE!
The solder
used in the production of this
product
contains LEAD.
In addition, other electrical/electronic
and/or plastic (where
applicable) components may also contain
traces of
chemicals found by
the California Health and
Welfare Agency (and possibly
other entities) to cause cancer and/or birth defects
or other
reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR
PLASTIC
COD/IPONENTS
IN YOUR MOUTH FOR
ANY REASON WHAT
SO
EVER!
Avoid
proionged, unprotected contact between
solder
and your
skin!
When soldering,
do not inhale solder fumes or
expose
eyes to
solder/flux
vapor!
If you come in
contact with solder or components located
inside the
enclosure
of this product, wash your hands
before handiing
food.
WARNING
Components having
special
characteristics are
marked
^
and
must be
replaced with parts
having specification equal
to those originally
installed.
1
To Next Page
Loading...
Need help?
General
