Yamaha RX-V677 Quick Start Guide

10/6/2017 RX-V677 Setting Receiver Back to Factory Settings - RX-V677 - RX-V - AV Receivers - Audio & Visual
http://faq.yamaha.com/us/en/article/audio-visual/av-receivers-amps/rx/rx-v677_black_u/10797/8403 1/2
RX-V677 Setting Receiver Back to Factory Settings
Setting the reciever back to factory settings
Note: This will be done on the front panel of the receiver only.
1. Set the unit to Standby Mode using the Main Zone Power button.
2. While holding down the Straight on the front panel, press the Main Zone Power button.
3. When SP IMP -8ohms Min or SP IMP -6ohms Min comes up on the reciever panel, let go
of the straight button.
4. Press the Program Arrow Right button repeatedly to select INIT- CANCEL.
5. Press the Straight button repeatedly to select INIT- ALL.
6. Press the Main Zone Power button to turn the unit off.

Yamaha RX-V677 Specifications

General

Receiver type	Surround
Audio output channels	7.2 channels
Dynamic power per channel (4 Ohm)	190 W
Dynamic power per channel (8 Ohm)	125 W
Power output per channel (1KHz@8 Ohm)	105 W
Power output per channel (20-20KHz@8 Ohm)	90 W
HDMI in	6
Remote (IR) input	1
Composite video in	5
Component video (YPbPr/YCbCr) in	2
12V trigger	Yes
Speakers connectivity type	-
Supported radio bands	AM, FM
Optical drive included	No
Product color	Black
Audio decoders	Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio
Volume control	Rotary
On Screen Display (OSD) languages	DEU, ENG, ESP, FRE, ITA, JPN, RUS
Power consumption (standby)	0.15 W

Weight and Dimensions

Depth	365 mm
Width	435 mm
Height	171 mm
Weight	10025 g