Yamaha VZ200 User Manual

Trouble Recovery
72
1. Stop the engine.
2. Remove the top cowling.
3. Disconnect the water detection switch
coupler.
CAUTION:
ECM01570
Be careful not to get any water on the wa-
ter detection switch coupler, otherwise a
malfunction could occur.
4. Unscrew the filter cup from the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when unscrewing the filter cup.
5. Drain the water in the filter cup by soak-
ing it up with a rag.
NOTE:
Properly dispose of the rag.
6. Firmly screw the filter cup onto the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when screwing the filter cup onto
the filter housing.
7. Connect the water detection switch cou-
pler securely until a click is heard.
8. Install the top cowling.
9. Start the engine and make sure that the
water separator warning indicator re-
1. Water separator warning indicator
1. Water detection switch coupler
1
ZMU05502
1. Filter cup
2. Water detection switch lead
1. Water detection switch coupler
1
2
ZMU05501
1
ZMU05500

Yamaha VZ200 Specifications

General

Brand	Yamaha
Model	VZ200
Category	Outboard Motor
Language	English