Yealink BH71 Manual

Manually Pair BH71 with BT51 (Optional)Manually Pair BH71 with BT51 (Optional)
Manually Pair Headset with BT51Manually Pair Headset with BT51
The BT51 dongle of the BH71 Pro has been pre-paired with the headset and is ready for use. If you want to pair the
BT51 dongle with another headset, or a separately purchased the BT51 dongle pairs with the headset, it needs to
be paired through Yealink USB Connect.
Before you beginBefore you begin: Make sure that the headset is in Bluetooth pairing mode.
1. Select BT51 dongle device CARD.
2. Click Device SettingsDevice Settings.
3. In the Pairable devices ListPairable devices List field, click to search the pairable device.
4. Find the desired device and click Start pairingStart pairing.
 NOTENOTE
One BT51 dongle can only save one headset pairing information.
If you want to pair the BT51 dongle with a new headset, you need to unpair the old headset first.
If you want to pair the headset with a new BT51 dongle, you need to make the headset enter the pairing
mode. Then search for the headset on the new BT51 dongle through the Yealink USB Connect and connect
it.
Manually Pair BH71 with BT51 (Optional)
1

Yealink BH71 Specifications

General

Product type	Headset
Product color	Black
Wearing style	In-ear
Recommended usage	Office/Call center
Bluetooth	Yes
Wireless range	30 m
Bluetooth version	5.2
Bluetooth profiles	A2DP, AVRCP, HFP
Connectivity technology	Wireless
Mobile operating systems supported	Android, iOS
Battery type	Built-in battery
Battery capacity	160 mAh
Charging time	90 min
Impedance	32 Ω
Driver unit	13 mm
Headphone frequency	100 - 20000 Hz
Maximum input power	10 mW
Headphone sensitivity	110 dB
Microphone type	Built-in
Microphone frequency	100 - 8000 Hz
Microphone sensitivity	-38 dB
Microphone direction type	Omnidirectional
Cables included	USB Type-C
Carrying case weight	52 g
Package type	Box
Package depth	323 mm
Package width	460 mm
Package height	145 mm

Weight and Dimensions

Weight	18 g