Frequently Asked Questions On the CP700 & CP900
1
Frequently Asked Questions
Q: Why do the answer call button and the end call button flash slowly,
but speakerphone fails to power on when you long press the power
button?
A: Low battery. Speakerphone will reboot automatically once it is connected to
PC or charger cradle.
Q: Why do you fail to answer the incoming call from the softphone when
you connect speakerphone to the mobile phone/PC via Bluetooth?
A: This feature is not available on mobile phone/PC.
Q: Why do you fail to connect speakerphone via Bluetooth？
A: Do the following:
Check whether speakerphone is in Bluetooth pairing mode.
Check whether speakerphone has been connected to two devices via
Bluetooth.
Q: Why speakerphone is silent when the connected mobile phone/PC is
playing music or during the call?
A: Check whether you set speakerphone as the audio output device for the
mobile phone/PC.
Q: Why is the other party unable to hear the voice during a call?
A: Do the following:
Check whether you remove the protective film from the speakerphone,
otherwise, the microphone might be blocked.
Check whether you set speakerphone as the default microphone device
for the mobile phone/PC and softphone.
Q: Why does the LED light-ring fail to glow or remain unchanged when
you press the volume up/down key?
A: Do the following:
Check whether the connected device is at the minimum volume. If it is,
speakerphone does not respond when you press the volume down
button.
To Next Page
Need help?
General
Weight and Dimensions
