Yealink SIP-T42G Setup Instructions

pg. 1
Ironton Telephone Company - October 11, 2017
Yealink SIP Telephones
Account Registration Setup
Yealink SIP-T42G/S:
1. Access the Sip Device’s IP Address.
• In order to provision the phone efficiently, you will need to log into the phone through its
web interface.
A. Press “OK” button
I. or press Menu->Status.
II. Press “up” or “down” arrows or to scroll through the list and view information.
B. The Phone Status will appear on the Screen.
I. Yealink Status Screen
a. Write down the phones IP Address.
b. If the IP address shows 0.0.0.0
01. Verify all connections to the Network.
2. Accessing the Web Interface.
A. Enter the IP address into the web browser address bar.
B. The Login screen will appear.
I. Enter the Username in the text field.
II. Enter the Password in the text filed.
III. Select the Login button.
C. The Phones Status Screen will open.
I. Select the Account Tab.
a. The Register section will open.
D. Select the account you wish to register using the drop-down menu.
E. Enable the line.
I. Select Enable in the Line Active drop-down menu.
F. Enter the following information for the Account in the text boxes.
I. Label:
• The name showing on the LCD of the Device.
a. Options.
01. Phone number.
02. Users Name.
03. and / or Extension Number.

Yealink SIP-T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm