Customizing Your Phone
Voice Message
Contact Directory
Ring Tones
Volume Adjustment
To add a contact:
To edit a contact:
Quick Reference Guide
Call History
Note: You can add contacts from the call history easily. For more information, refer to Call History above.
To delete a contact:
To listen to voice mail messages:
Press the Dial soft key to place a call.
Select Detail to view detailed information about the entry.
Select Add to Contacts to add the entry to the local directory.
Select Add to Blacklist to add the entry to the blacklist.
Select Clear to delete all the entries from the list.
Press during a call to adjust the receiver volume of the handset/speakerphone/
headset.
Press when the phone is idle to adjust the ringer volume.
Press the Delete soft key to delete the entry from the list.
The Message Waiting Indicator on the idle screen indicates that you have new voice messages
waiting. The power indicator LED slow flashes red.
1. Press or the Connect soft key.
2. Follow the voice prompts to listen to your voice messages.
1. Press the Calllog soft key when the phone is idle, press or to scroll through the list.
2. Select an entry from the list, you can do the following:
If you press the Option soft key, you can also do the following:
1. Press the Favorites soft key when the phone is idle, and then select the desired group.
2. Press the Add soft key to add a contact.
1. Press the Favorites soft key when the phone is idle, and then select the desired group.
1. Press the Favorites soft key when the phone is idle, and then select the desired group.
3. Press the OK soft key when “Delete selected contact?” prompts on the LCD screen.
1. Press the Menu soft key when the phone is idle, and then select Basic->Sound->Ring Tones.
2. Press or to select the desired ring tone.
3. Press the Save soft key to accept the change.
3. Update the contact information.
4. Press the Save soft key to accept the change.
4. Press the Save soft key to accept the change.
3. Enter a unique contact name in the Name field, and enter the phone number in the proper field.
2. Press or to select the desired contact, press the Option soft key and then select Detail
from the prompt list.
2. Press or to select the desired contact, press the Option soft key and then select Delete
from the prompt list.
Applies to firmware version 71 or later.
SIP-T46G
Ultra-elegant Gigabit IP Phone
Copyright 2013 YEALINK NETWORK TECHNOLOGY CO.,LTD.
c
www.USAPhone.com | 856.761.1000
www.USAPhone.com | 856.761.1000
To Next Page
Need help?
General
Weight and Dimensions
