Yealink SIP-T58A Quick Reference Guide

CONTROL VIDEO DURING A CALL
Change the video view
Tap  to display the video on full screen.
Tap  to display video in the call control panel.
Turn video view on/off during a call
Swipe down from the top of the screen to open the control
center. Tap Video to toggle video from phone
camera on/off.
HOLD AND RESUME CALLS
Place a call on hold
Press the Hold button or soft key during an active call.
The line soft key controlling the call will indicate the is
on hold.
Resume a held call
Press the line soft key controlling the call or the
Resume sof t key.
VOICEMAIL
Set up voicemail
If voicemail is available for your extension, the system will walk you through your
voicemail setup the first time you press the  button.
Check voicemail from your phone
Once you have set up your voicemail, press the  button
and follow the prompts.
For full user guides and video tutorials, visit help.ena.com and select ENA SmartVoice
NAVIGATE THE TOUCH SCREEN
Swipe left or right to switch between home and widget screens. Swipe down from
the top of the screen to open the control and notification center.
Tap  to go back to previous screen.
Tap  to return to the home screen.
Tap  to view and manage recently used applications.
PLACE VOICE/VIDEO CALLS
Using the handset
Dial the number you are calling, then pick up the handset.
Note: You may place a call by picking up the handset before
dialing. Just be aware the system will attempt to complete the
call after a slight pause in entering digits on the dialpad.
Using the speakerphone
With the handset in the cradle, dial the number you
are calling, then press  or the Send sof t key.
ANSWER CALLS
Using the handset
When a call comes in, pick up the
handset.
Using the speakerphone
When a call comes in, press  or the Answer soft key.
Answer a second call
When a second call comes in, press the Answer soft key or the ringing line soft key.
The active call is automatically placed on hold.
USB camera must
be installed for
video features to
work
Quick Reference Guide
Yealink SIP-T58A and T58V

Yealink SIP-T58A Specifications

General

Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Operating system version	5.1.1
Operating system installed	Android
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Bluetooth	No
Security algorithms	SRTP
Networking standards	IEEE 802.1x
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP/TFTP/HTTP/HTTPS, IPv4/IPv6, UDP/TCP/DNS-SRV
USB 2.0 ports quantity	2
Voice codecs	G.711Mu, G.711a, G.722, G.722.1, G.722.1C, G.723, G.726, G.729ab, iLBC
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Front camera resolution (numeric)	2 MP
Base station keys	27
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
Power consumption (typical)	1.9 W
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	220 mm
Width	259.4 mm
Height	239 mm
Package depth	293 mm
Package width	324 mm
Package height	128 mm