Yealink T21-E2 User Manual

Encore Quick User Guide
Yealink T21-E2
Page
1
Placing a Call
Using the Handset:
1. Pick up the handset
2. Enter the number
3. Press Send
Using the Speaker Phone:
1. Press
2. Enter the number
3. Press Send
Answering a Call
Using the Handset:
1. Pick up the handset
Using the Speakerphone:
1. Press
* You can reject an incoming call by pressing the Reject soft key.
Ending a Call
Using the Handset:
1. Hang up or press End Call
Using the Speakerphone:
1. Press or press End Call
Redial
1. Press to enter the Placed Calls List.
2. Press  or  to select the desired entry.
3. Press or the Send Key.
*Press twice when the phone is idle to redial the last number.
Missed calls
1. Press the view soft key
2. Press  or  to select the desired entry.
3. Press the Send key
Call Mute / Un-Mute
Press to mute the microphone during a call. Press again to un-mute the call.
Call Hold & Resume
Place Call on Hold: Press the Hold soft key during an active call
Resuming a call do one of the following: Press the Resume soft key
If more than one call is on hold, press  or  to select the call, then press Swap.
Call T ransfer
Blind Transfer
1. Press the Trans Soft key
during a call.
*The call is placed on hold.
2. Enter the number you want
to transfer to.
3. Press the B Trans Soft
Key to transfer the call or
simply hangup.
Semi-Attended Transfer
1. Press the Trans Soft key
during a call.
*The call is placed on hold.
2. Enter the number you want
to transfer to and # or Send
3. After the user answers
press the Trans Soft key.
Attended Transfer
1. Press the Trans Soft key
during a call.
*The call is placed on hold.
2. Enter the number you want
to transfer to and # or Send
3. Once the user you called
is ready to accept the call
press the Trans Soft key.

Yealink T21-E2 Specifications

General

Brand	Yealink
Model	T21-E2
Category	IP Phone
Language	English