Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
520
6-Line Printer Subsystem
7-Network News Subsystem
8-UUCP Subsystem
9-Clock Daemon (note 2)
10-Security/Authorization Messages (Note 1)
11-FTP Daemon
12-NTP Subsystem
13-Log Audit (note 1)
14-Log Alert (note 1)
15-Clock Daemon (Note 2)
16-Local Use 0 (Local0)
17-Local Use 1 (Local1)
18-Local Use 2 (Local2)
19-Local Use 3 (Local3)
20-Local Use 4 (Local4)
21-Local Use 5 (Local5)
22-Local Use 6 (Local6)
23-Local Use 7 (Local7)
Note: Note 1 - Various operating systems have been found to utilize Facilities 4, 10, 13 and 14 for secur-
ity/authorization, audit, and alert messages which seem to be similar. Note 2 - Various operating systems
have been found to utilize both Facilities 9 and 15 for clock (cron/at) messages.
Default 16
Web UI Settings->Configuration->Syslog->Syslog Facility
Parameter static.syslog.prepend_mac_address.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to prepend the MAC address to the log messages exported to the sys-
log server.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Configuration->Syslog->Syslog Prepend MAC
Viewing the Syslog Messages on Your Syslog Server
You can view the syslog file in the desired folder on the syslog server. The location of the folder may differ from the sys-
log server. For more information, refer to the network resources.
The following figure shows a portion of the syslog:
To Next Page
Loading...
Need help?
General
