Yealink T33G User Manual

Yealink-T33G-220314-UG Page 3TelNet Worldwide, Inc. • telnetww.com • (800) 508-1254
Yealink T33G
User Guide
Conference Calls
Conduct Conference Calls
1. Make call to or receive call from other party
2. Press Conf softkey
3. Dial the third party and press Call (or #)
4. Wait for third party to answer then press Conf
5. Press Split to remove a party from the conference
Forward Calls
NOTE:
• Please see Quick Dial section of this guide for additional
Call Forwarding options and methods.
To enable call forwarding always (rst time setup)
1. Press Forward, then enter the forwarding number or
extension
2. Press the up navigation arrow to select the Always
Forward option
3. Press Switch to enable forwarding
4. Press Save
NOTE:
• The next time you press forward it will automatically
forward to the last number specied.
To modify an existing forwarding number, press Menu,
navigate to Features, OK > Call Control > Call Forward >
Always Forward. Press down arrow to select the forwarded
number. Modify number as required and then press Save. Lift
handset to clear screen.
Disable Call Forwarding Always
1. Press Forward
Call Forwarding No Answer
1. Press Menu, navigate to Features, OK > Call Control >
Call Forward > select No Answer Forward
2. Select options to enable, enter number and specify
number of rings. Modify number as required and then
press Save. Lift handset to clear screen.
Call Forwarding Busy
1. Press Menu, navigate to Features, OK > Call Control >
Call Forward > select Busy Forward
2. Select options for enabled, navigate down and enter the
forward to number. Modify number as required and then
press Save. Lift handset to clear screen.
Intercom
• To connect directly to the speakerphone of a co-worker,
press Interco, dial the extension followed by # (or press
Call)
NOTE:
• If you are receiving an intercom call, the phone
beeps, then the caller automatically connects to your
speakerphone
Do Not Disturb
• To disable ringing, press DND. The LCD display will show
a DND icon and any incoming calls will be directed to
voicemail
• Press DND again to re-enable ringing
Menu
• The Menu softkey provides access to multiple options.
Use the navigation keys to highlight desired option and
press Enter softkey or OK
Redial
• To redial the last call placed, press Redial Key > Call, or
press the Redial Key twice.
NOTE:
• You can also use the down navigation key to select a
number from a list to redial.

Yealink T33G Specifications

General

Brand	Yealink
Model	T33G
Category	Telephone
Language	English